Made just for your Z3*, nothing else.

The Z3 doesn't have nearly as much aftermarket support as the E36 models, and for a long time, Z3 owners had to buy custom E36 parts like this, hope it fits, and sometimes even do custom wiring work for a "plug and play" part. Those days are in the past! We designed these parts specifically to be completely plug and play with your Z3. Simply choose if you want to install this part in a thin or thick switch slot and we'll send you exactly what you need!

Note: If you're not sure, the thin switch slot is roughly 41.5mm (1.63") x 18.5mm (0.73") and the thick slot is roughly 42.5mm (1.67") x 23mm (0.9"). Measure either the switch blank you're replacing or the hole this part is going to fill and order whichever fits those measurements!

Also, by default, these are wired for Dashboard fitment. Please let us know either at checkout or as a separate message after ordering if you want to install this part in the Roof Control Switch Panel. The part itself will physically fit in either space, but the wiring will need to be extended.

*The installed part images may be inside of E36s as placeholders. This is temporary until I can take pictures inside a Z3 interior.

Double barreled charging, peashooter prices. 

Say hello to our Dual USB charger. These chargers are rated for 15W with 3A peak and 2.1A sustained charging. They have overcurrent, thermal, and short-circuit protections built in.

Note:  This charger is perfect for non-smart device charging, like cameras, bluetooth devices, or vapes. However, it's painfully slow at charging modern smart devices. It'll do it, just very slowly. If charging speeds are important to you, check out our Fast USB, USB-C, Dual USB-C, and USB+USB-C Combo chargers. Those have fast and even super fast charging protocols compatible with most modern devices. If you're planning on using this to charge your phone, I highly recommend one of our other options.

Infinitely customizable.

Whether your car is a daily or a racecar, whether your dash is OEM fresh or covered in sadboi stickers and anime girls, whether you have no idea what a multimeter is or have held one in your hand every day for the past 10 years, we can make something completely, uniquely yours. We can custom-make your part however you want it (within reason). Do you want it untextured so you can vinyl wrap it? Do you want an extra 5 feet of wire to make your own circuit instead of the cigarette lighter connectors? However you want it, message us and we can do it. Keep in mind that custom requests may take some time to process and ship.

USB outlet socket color *MAY* vary. The standard socket color is purple, however we also have orange. We do have black as well, but the black socket boards are not SFC capable. It's only visible while nothing is plugged in, so it will usually not be visible. If you have an IMPORTANT socket color preference, please message us before ordering and we'll let you know if we have what you want on hand. If you have a preference but it isn't' that important, let us know at checkout and we'll try our best to ship your preference out to you.